This article addresses some of the common issues associated with house painting blog link. Also, we have explained the causes and how to remedy them.

Are you experiencing problems with the house painting? Do you wish to hire domestic painters to do it again? Although it’s a good idea for you to get your home painted, you may be facing some problems. How can you ensure the problems you face now won’t recur again? The only way to do this is if your home is in need of a re-paint. It is most often a result of a bad painting job by the contractor. It is important to know the reasons for these problems so that you can take steps to prevent them from happening again.

Blistering

It is common for people to encounter blistering on their home paint. There are small bubbles, or blisters, that appear on the painted surface. This happens when the adhesion of the paint or its stickiness is lost, causing the paint to lift and form bubbles. It is due to improper painting. The paint is applied to an un-dried surface. It could be damp or wet. Be sure that the surface you’re repainting is completely dry before you start painting.

Peeling

Many people complain about paint peeling from the surface. It is again due to poor surface preparation. Either the surface that was painted was dirty, or it was damp. Peeling paint can also occur when the wall is repainted, without the prior coat of painted being removed. Priming the surface you want to paint is one of the best things you can do to prevent it from peeling. It means that the surface should be smoothed out by sanding, and then a small area around the peeling must be scraped with a stiff brush to remove any previous paint. In order to prevent the problem, you need to find out what is causing the dampness.

Mildew

Mildew can cause a paint problem and pose a potential health risk. This happens in places that don’t receive sunlight and are dark. A mildew problem can be caused by surfaces that are not properly primed or have been underprepared. You can solve this problem by cleaning the surface thoroughly with a solution of bleach and applying primers that resist mildew.

Wrinkling

It is easiest to understand wrinkling if you see a crinkled texture on the wall. It happens when the surface is wrinkled by the paint. There are two possible reasons for wrinkles. If the paint has been over-painted or the moisture is high, it may take longer for the paint to dry. You can fix this by removing the wrinkled layer of painted and starting again. However, you must wait until the primer or the first paint layer has completely dried before applying a second coat.

These problems can be avoided by paying attention the quality of surface prep done by domestic Melbourne painters.